Sistem Pengunci Otomatis Terrarium Reptile Dengan Kendali Aplikasi Finger Print Berbasis Arduino

Article Sidebar

PDF (Bahasa Indonesia)
Published: May 5, 2020
DOI: https://doi.org/10.32815/jitika.v14i1.446
Keywords:
Reptile, Arduino, Finger Print

Main Article Content

Eka Kusuma Pratama
Universitas Bina Sarana Informatika

Abstract

ABSTRACT. As time progressed also a new Hobby in the community such as the Hobby Reptile or better known as Reptiler. Many pure reptilers have been maintaining several types of dangerous or high-quality animals, some of which only follow the trend or are currently viral. Because of the ease of access to video sharing or photos in various social media applications leads to a high sense of ignorance and follow the trend that is being viral today. Unfortunately, many new reptilers only follow the trend but do not understand the risk of danger arising with many of its victims from the bite of some kind of rattlesnake this time lately. So that in the future no casualties arise due to Reptiler's hobbies that maintain different types of dangerous animals it is necessary that a double security method is able to help reduce the risk in the hobby. Prototype starts with the creation of a terrarium with a Microkontoler-based auto-lock, which is made up of several components i.e. Arduino UNO, Bluetooth module HC-05, Relay, Solenoid Lock and Android smartphone (including fingerprint) As an integrated automatic key controller using the Arduino as a controller.

Downloads

Download data is not yet available.

Article Details

How to Cite
Pratama, E. K. (2020). Sistem Pengunci Otomatis Terrarium Reptile Dengan Kendali Aplikasi Finger Print Berbasis Arduino. Jurnal Ilmiah Teknologi Informasi Asia, 14(1), 69–74. https://doi.org/10.32815/jitika.v14i1.446
Issue
Vol. 14 No. 1 (2020)
Section
Article

Authors retain copyright of their work and grant Jurnal Ilmiah Teknologi Informasi Asia the right of first publication. The work is simultaneously licensed under a Creative Commons Attribution 4.0 International License (CC BY 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

While the editorial board endeavors to ensure accuracy, they accept no responsibility for the content of articles. Liability rests solely with the respective authors.

This is an open-access journal. All articles are immediately available to read and reuse upon publication under the CC BY 4.0 license. Users may share and adapt the material for any purpose, including commercial use, provided they comply with the license terms.

Crossref
Scopus
Google Scholar
Europe PMC

References

Anwar, Y. El, Soedjarwanto, N., Repelianto, A. S., Belakang, A. L., & Jari, A. S. S. (2000). Prototype Penggerak Pintu Pagar Otomatis Berbasis Arduino Uno ATMEGA 328P dengan Sensor Sidik Jari.
Fatoni, A., Rendra, D. B., Studi, P., Komputer, S., & Pendahuluan, I. (2014). PERANCANGAN PROTOTYPE SISTEM KENDALI LAMPU MENGGUNAKAN HANDPHONE ANDROID, 1(September).
Helmi Guntoro, Yoyo Somantri, E. H. (2013). RANCANG BANGUN MAGNETIC DOOR LOCK MENGGUNAKAN KEYPAD DAN SOLENOID BERBASIS MIKROKONTROLER ARDUINO UNO, 12(1), 39–48.
LIsah, Muhajirin, iskandar akbar. (2017). Sistem keamanan pintu berbasis arduino mega. Jurnal Informatika UPGRIS, 3(2), 99–104.
Ramadhan, A. S., Handoko, L. B., Informatika, T., Komputer, F. I., & Nuswantoro, U. D. (2016). RANCANG BANGUN SISTEM KEAMANAN RUMAH BERBASIS ARDUINO MEGA 2560. Techno.Com, 15(2), 117–124.
Saefullah, A., Immaniar, D., & Juliansah, R. A. (2015). SISTEM KONTROL ROBOT PEMINDAH BARANG MENGGUNAKAN.
Silvia, A. F., Haritman, E., & Muladi, Y. (2014). RANCANG BANGUN AKSES KONTROL PINTU GERBANG BERBASIS ARDUINO DAN ANDROID, 13(1), 1–10.